I am wondering, how can we run an induction motor as an "induction generator"...?

I just know that for an induction generator, the slip is greater than unity. But how can we PRACTICALLY run it?

do you know how tramways works

Linear motor
From Wikipedia, the free encyclopedia
��� Learn more about citing Wikipedia ���Jump to: navigation, search

A linear motor for trains running Toei Oedo line.
Free-body diagram of a U-channel linear motor. The view is perpendicular to the channel axis. The two coils at center are mechanically connected, and are energized in "quadrature" (with a phase difference of 90属 (��/2 radians)). If the bottom coil (as shown) leads in phase, then the motor will move downward (in the drawing), and vice versa. (Not to scale)A linear motor is essentially a multi-phase alternating current (AC) electric motor that has had its stator "unrolled" so that instead of producing a torque (rotation) it produces a linear force along its length. The most common mode of operation is as a Lorentz-type actuator, in which the applied force is linearly proportional to the current and the magnetic field (F = qv �� B).

Many designs have been put forward for linear motors, falling into two major categories, low-acceleration and high-acceleration linear motors. Low-acceleration linear motors are suitable for maglev trains and other ground-based transportation applications. High-acceleration linear motors are normally quite short, and are designed to accelerate an object up to a very high speed and then release the object, like roller coasters. They are usually used for studies of hypervelocity collisions, as weapons, or as mass drivers for spacecraft propulsion. The high-acceleration motors are usually of the linear induction design (LIM) with an active three-phase winding on one side of the air-gap and a passive conductor plate on the other side. The low-acceleration, high speed and high power motors are usually of the linear synchronous design (LSM), with an active winding on one side of the air-gap and an array of alternate-pole magnets on the other side. These magnets can be permanent magnets or energized magnets. The Transrapid Shanghai motor is an LSM.

When a linear motor is used to accelerate beams of ions or subatomic particles, it is called a particle accelerator. The design is usually rather different as the particles move close to the speed of light and are generally electrically charged.

Contents [hide]
1 Low acceleration
2 Usages of a Linear Motor for Train Propulsion
2.1 Usage with conventional rails
2.2 Usage with magnetic levitation
3 High acceleration
4 See also
5 External links



[edit] Low acceleration

ART trains propel themselves using an aluminium induction strip placed between the rails.The history of linear electric motors can be traced back at least as far as the 1840s, to the work of Charles Wheatstone at King's College in London [1], but Wheatstone's model was too inefficient to be practical. A feasible linear induction motor is described in the US patent 732312 ( 1905 - inventor Alfred Zehden of Frankfurt-am-Main ), for driving trains or lifts. The German engineer Hermann Kemper built a working model in 1935 [2]. In the late 1940s, professor Eric Laithwaite of Imperial College in London developed the first full-size working model. In his design, and in most low-acceleration designs, the force is produced by a moving linear electromagnetic field acting on conductors in the field. Any conductor, be it a loop, a coil or simply a piece of plate metal, that is placed in this field will have eddy currents induced in it thus creating an opposing electromagnetic field. The two opposing fields will repel each other, thus forcing the conductor away from the stator and carrying it along in the direction of the moving magnetic field.

Because of these properties, linear motors are often used in maglev propulsion, as in the Japanese Linimo magnetic levitation train line near Nagoya. However, linear motors have been used independently of magnetic levitation, as in Bombardier's Advanced Rapid Transit systems worldwide and a number of modern Japanese subways, including Tokyo's Toei Oedo Line.

Similar technology is also used in some roller coasters with modifications, but at present is still impractical on street running trams, although this in theory could be done by burying it in a slotted conduit.

Outside of public transportation, vertical linear motors have been proposed as lifting mechanisms in deep mines, and the use of linear motors is growing in motion control applications. They are also often used on sliding doors, such as those of low floor trams such as the Citadis and the Eurotram. Dual axis linear motors also exist. These specialized devices have been used to provide direct X-Y motion for precision laser cutting of cloth and sheet metal, automated drafting, and cable forming.Mostly used linear motors are LIM (Linear Induction Motor), LSM (linear Synchronous Motor). Linear DC motors are not used as it includes more cost and Linear SRM suffers from poor thrust. So for long run in traction LIM mostly preferred and for short run LSM mostly preferred.

From concept to industrial use

In the 1980s British engineer Hugh-Peter Kelly designed the first tubular linear motor by enclosing the permanent magnets in a sealed stainless steel cylinder. It was brought to market by linear motor manufacturer Linear Drives (now Copley Motion Systems) . The patented permanent magnet arrangement induces a sinusoidal response in the coils that are enclosed in a square profile body. This allowed machine builders to use the new linear motors with standard sinusoidal servo drives commonly used in motion control.

Tubular Linear Motors

Tubular linear motors are more rugged than early flat bed and u-channel linear motors allowing them to be used in dirty industrial environments such as food packaging and machine tools. The tubular construction protects the permanent magnets from the external environment and automatically balances attractive forces so that the motor is easier to integrate into machines. These motors operate at 5- 9 m/s with high acceleration for dynamic motion control.

A new type of linear motor, called the ServoTube (see Eureka March 2005) has allowed linear motors to be used in industrial environments by integrating the position sensing electronics into the motor body (called a forcer).


[edit] Usages of a Linear Motor for Train Propulsion

[edit] Usage with conventional rails
All applications are in rapid transit.

Bombardier ART:
Scarborough RT in Toronto (opened 1985)
SkyTrain in Vancouver (opened 1985)
and more in service and in construction (see ART)
Several Subways in Japan and China, built by Kawasaki Heavy Industries:
Limtrain in Saitama (short-lived demonstration track, 198
Nagahori Tsurumi-ryokuchi Line in Osaka (opened 1990)
Toei ��edo Line in Tokyo (opened 2000)
Kaigan Line in Kobe (opened 2001)
Nanakuma Line in Fukuoka (opened 2005)
Green Line in Yokohama (opened 200
T��zai Line in Sendai (under construction)
Line 4 of Guangzhou Metro, China (opened 2005). Line 5 and 6 under construction. [3]
Beijing Subway Capital Airport Track
Both the Kawasaki-Trains and Bombardier's ART have the active part of the motor in the cars and use overhead wires (Japanese Subways[4][5]) or a third rail (ART[6]) to transfer power to the train.


[edit] Usage with magnetic levitation
Main article: Maglev (transport)
High-speed trains:
Transrapid: first commercial use in Shanghai (opened in 2004)
JR-Maglev
Rapid transit:
Birmingham Airport, UK (opened 1984, closed 1995)
M-Bahn in Berlin, Germany (opened in 1989, closed in 1991)
Daejeon EXPO, Korea (ran only 1993) [7]
HSST: Linimo line in Aichi, Japan (opened 2005)

[edit] High acceleration
High-acceleration linear motors have been suggested for a number of uses. They have been considered for use as weapons, since current armor-piercing ammunition tends to consist of small rounds with very high kinetic energy, for which just such motors are suitable. Many amusement park roller coaster now use linear induction motors to propel the train at a high speed, as an alternative to using a lift hill. The United States Navy is also using linear induction motors in the Electromagnetic Aircraft Launch System that will replace traditional steam catapults on future aircraft carriers. They have also been suggested for use in spacecraft propulsion. In this context they are usually called mass drivers. The simplest way to use mass drivers for spacecraft propulsion would be to build a large mass driver that can accelerate cargo up to escape velocity.

High-acceleration linear motors are difficult to design for a number of reasons. They require large amounts of energy in very short periods of time. One rocket launcher design (see [8]) calls for 300 GJ for each launch in the space of less than a second. Normal electrical generators are not designed for this kind of load, but short-term electrical energy storage methods can be used. Capacitors are bulky and expensive but can supply large amounts of energy quickly. Homopolar generators can be used to convert the kinetic energy of a flywheel into electric energy very rapidly. High-acceleration linear motors also require very strong magnetic fields; in fact, the magnetic fields are often too strong to permit the use of superconductors. However, with careful design this need not be a major problem.

Two different basic designs have been invented for high-acceleration linear motors: railguns and coilguns.